Start-Elements. Piping Component Analysis


Start-Elements allows analysis of separate piping elements. To use element analysis, open or create a Start-Elements file. When creating a project, you will be asked to select the code to be used for the analysis.

After selecting the code, press OK. Various analyses can be accessed through a Start-Elements tree. Only analyses covered in the selected code will be available (see Table 1).

To work with elements, use the "elements file navigation" toolbar (fig. 3), which allows starting the analysis, copying and pasting data, adding and viewing various elements of one type.


Fig. 3

Menu Access

When the project file is closed: File > New

Then, select "Elements"